Shenzhen Hicorpwell Technology Co., Ltd
Quality is not only an act, it is a habit.
Add to Cart
Fiber Optic Fast Connector designed for FTTH is a new generation of fiber connector used in assembly.
It can provide Open flow and precast type of products, whose optical and mechanical specification meets the standard optical fiber connector.
It is designed for high quality and high efficiency for installation.
The structure of crimping position is a unique design, and need not gluing, polishing neither any consumables.
Adopted fiber preinstalled structure, and convenient for field installation.
Fast connector terminates the end of an optical fiber, and enables quicker connection
and disconnection than splicing.
The connectors mechanically couple and align the cores of fibers so light can pass.
Better connectors lose very little light due to reflection or misalignment of the fibers.
we supply the FC type, LC type, SC type and ST type fast connectors for FTTH drop cable,
0.9mm 2.0mm 3.0mm indoor cable.
All our Fiber Optic Fast Connectors meet RoHS Compliant, and 100% test Insert loss before shipment.
| Applicable for | 3.1x2.0mm drop cable or 3.0/2.0/0.9mm cable |
| Optical fiber diameter | φ125um (657A&657B) |
| Tight buffer diameter | φ250um |
| Fiber mode | Single mode |
| Operation time | About 10s (exclude fiber cut) |
| Insert loss | ≤0.3dB (1310nm & 1550nm) |
| Return loss | ≥45dB |
| Fastening strength of naked fiber | ≥ 5N |
| Tight clamping force cladding | ≥ 8N |
| Tensile strength | ≥ 50N |
| Using temperature | -45°C~+80°C |
