Shenzhen Hicorpwell Technology Co., Ltd
Quality is not only an act, it is a habit.
Add to Cart
Field installation connector is a new kind of connector that could be used in FTTH project scene.
They don’t need to polishing, no epoxy. They could be installed in the field and make connection
less than two minutes. Of course, It don’t need fused the fiber.
Just some little tools enough, so it could save time and cost.
We could offer embedded type fast connector. This connector has a bare fiber insert in the ferrule.
The front end face was polished in advance. The fiber mating point is in a precision V groove.
Feature:
- Polishing way is UPC or APC
- Connector type is SC/FC/LC and could match with normal SC/FC/LC adapter
- Related cable is Bow-type drop cable 2.0*3.1 or normal 3.0mm.
- Good performance and high success rate
- Easiness in installation
- Special tool is simple and convenient to use
Specifications
| Items | Test condition | Value |
| Optical performance | Insertion Loss(1310nm&1550nm) | <0.2dB(typical)/ 0.5dB(Max) |
| Return Loss(1310nm&1550nm) | UPC>40dB,APC>50dB | |
| Environmental Performance (Max. Insertion Loss change) | Temperature Cycle -20°C ~+70°C (96hours) | <0.2dB |
| Mechanical Performance (Max. Insertion Loss change) | Online tension 20N- 100N | <0.2dB |
| Impaction 3 axis/3times 4m high | <0.2dB | |
| Repeated operation times | 5 |
